Are you moving to a new place and the tiles there are grouted? Need help cleaning grout without scrubbing out? Many homeowners enjoy the stunning, enduring, and permanent impression that cleaning grout between the tiles leaves. However, cleaning grout that has become mouldy, grimy, or discoloured is extremely difficult.
If you’re wondering how to clean floor grout without scrubbing, the truth is that there isn’t a method to totally do it away and make it completely clean without scrubbing but here are a few methods to make it easier.
Many of us are familiar with getting on our hands and knees for cleaning the grout until it sparkles and looks brand-new. You wouldn’t believe it, but this isn’t the only or even the best method for thoroughly cleaning grout.
So here we are with some easy DIYs to get your hands on cleaning grouts without cleaning.
Easiest Way to Clean Grout without Scrubbing
There are many simple methods to accomplish this, but few things to keep in mind before we get started. Starting with the mildest cleaning solution is usually a good choice. Highly acidic or caustic cleaners, such as vinegar or bleach, will corrode and progressively erode tile coatings and grout. With only some hot water and a brush, you might be astonished at how thoroughly you can clean your grout. However, if the grout is severely discoloured, there are several efficient grout cleaners in the market that you can use.
1. Peroxide and Baking Soda
This DIY is the simplest way to clean grout without scrubbing. Baking soda and hydrogen peroxide when used together frequently proves to be the most effective. These two chemicals come together to create a powerful foaming combination that, in one step, removes stains and shines the grout.
Mix the baking soda, peroxide, and dish soap for this treatment, then apply it to the damaged grout. After letting the mixture sit for at least 10 minutes, gently clean the area until any discoloration begins to go away.
2. Vinegar and Citrus Grout Cleaner
We all have heard about the powerful effects of mixing vinegar and baking soda. The grout lines may also be polished and the stains removed using the same volatility.
For this DIY, spray the concoction into the grimy grout after combining warm water, baking soda, lemon juice, and white vinegar for this tile cleaner. Give the mixture at least an hour to rest. The majority of the dirt and filth should peel away when you gently scrub the grout. Additionally, this is by far the simplest method for removing mortar from a tile.
3. Clorox Bleach
Bleach or oxygen bleach is the greatest cleaner for grout in terms of pure strength alone. If you’re searching for a strong cleaning product for your grout, bleach, however, is a caustic cleaner that can damage your tiles and you. Although it is a terrific method to revive bathroom tiles that have been neglected or hampered by tough stains and buildup, it is not advised to use it frequently.
If you want to clean tile using chlorine bleach, apply the undiluted solution to the stained grout and wait. Avoid leaving the bleach on the tile for an extended period of time; not only can this cause irreversible damage to the grout, but it will also reduce the amount of cleaning required.
Tip: Now that we know how to clean grout without scrubbing, here are some other tips to follow to get maximum results.
Sealing Your Grout:
Using grout sealer often and properly is the only surefire way to keep from having to clean your tiles and grout. While certain cleaners are more effective than others at cleaning grout, the time has not yet come for cleaners to fully clean grout.
Until then, you should be able to get rid of any remains of tile grout, whether it was coloured or white, on tile floors or shower walls, with the help of these above-mentioned DIY recipes.
Keep it clean:
By using a grout sealer, you can best protect all of your hard work. Sealants block dirt and grime from entering grout by filling in the pores. Allow the grout to cure completely for at least 24 hours before sealing it. The sealer you select and the amount of traffic the area sees will determine how frequently your grout has to be resealed.
Bottom Line
In our opinion, the best combination that works for the easiest way to clean grout without scrubbing is peroxide and baking soda. Why is this? Because baking soda has a moderate abrasive quality, it works to safely dissolve grime that has become embedded in porous grout surfaces. Another natural bleach substitute that whitens and kills germs is hydrogen peroxide. Additionally, it is non-toxic and breaks down into oxygen and water.
Therefore, this combination works best, but as we already stated, always try it before using any cleaner.
